3 Pole AC Coil Power Contactor DIN Rail - Current:40 Amp

Sorry - this product is no longer available

Short Description:
An electrically controlled switch called a power contactor is used to switch a power circuit. A circuit that is often considerably weaker than the switched circuit, such as a 24 volt coil electromagnet controlling a 240 volt motor switch, controls the contactor.
Manufacturer EATON
Availability In stock
Place Of Origin India
Return Returnable Product
1 week
Call for pricing
This product has a minimum quantity of 1000

Product Specification

Model Name/Number DILM40
Number Of Poles 3 Poles
Brand Eaton
Switching Current 57 A
Voltage 230VAC
Mounting Type DIN Rail
Current 40 Amp
Phase Single Phase
Usage/Application Industrial
Frequency 50/60 Hz
Power Rating 18.5 kW
RoHS compliant Active
Contractor Type AC
I Deal In New Only
Minimum Operating Temperature -25 DegreeC
Maximum Operating Temperature +45 DegreeC
Terminal Type Screw
Depth 147 mm
Length 115 mm
Width 77 mm

Product Description

The DILM40 (230V 50HZ, 240V 60HZ) from Eaton Moeller is a three pole contactor with normally open (N/O) contacts. This smart and compact design device has ingenious mechanical interlocks (rocker and ball style) that allow fast and easy assembly of contactor combinations without requiring additional space.
  • AC-1, AC-3 and AC-4 utilization category
  • 230V/50Hz, 240V/60Hz coil voltage
  • Rated operational current of 50A (AC-3) and 21A (AC-4) at 380V to 400V
  • Rated operational voltage of 690VAC
  • Motor rating of 22KW (AC-3) and 10KW (AC-4) at 380V to 400V
  • 3 pole conventional free air thermal current of 58A at 50Hz/60Hz (AC-1, enclosed)
  • IEC/EN 60947-4-1, UL 508, CSA-C22.2, CE and VDE 0660 approved
  • Ambient temperature range from -25°C to 60°C (open) and -25°C to 40°C (enclosed)
  • IP00 degree of protection
  • Breaking capacity of 500A at 380V to 400V

Electrical circuits are switched on and off using a contactor, a type of electrical equipment. It is thought of as a special form of relay. Applications requiring a higher current carrying capacity are used contactors, and those requiring a lower current are used relays. This is the key difference between a contactor and a relay. Contactors are compact and easily mounted in the field. Usually, these electrical devices have a large number of contacts. These contacts, which are frequently open in their normal states, supply electricity to the load when the contactor coil is activated. Contactors are often used to regulate electric motors.