Reachable at 9311712978 
011-46039993 (Ext. 21 to 32) (10am - 06pm)
You have no items in your shopping cart.
Filter by price
BHUPINDRA
EOT Crane-Wattage:440W
Electric overhead travelling cranes, also known as bridge cranes, are one of the most common types of overhead cranes, consisting of parallel runways with a travelling bridge spanning the gap.
Hoist With Trolley-Frequency:50 Hertz (HZ), Height:20Mtr
The trolley is the mechanism that moves the crane's hoist along the bridge girder. To position the hoist above a load, it is moved horizontally along the top or underside of the bridge girder (Figure 1, Motion 2). Trolleys are classified into three types: low headroom, normal headroom, and double girder trolleys.
Low Headroom Hoist-Frequency:50 Hertz (HZ), Capacity:1-3 Ton/day
Maximum load capacity of 2,000 kg. Design optimized to make the most of the available height. All trolley types are compatible. Operating limit switches for the highest and lowest hook position are standard on all KDC travelling hoists.
Rope Type Girder Eot Crane-Voltage:440V, Capacity:1-3Ton
A single girder crane is used for light duty, short-term work. It has a normal lifting capacity of 20 tones and can work for a maximum of 6 hours. Actually, it is best suited for lifting capacities ranging from 1 to 20 tones. A single-girder EOT crane is useful for short-term operations with low duty loads.
HOIST-Sling Type: Chain, 440W, Maximum Lifting Weight:1 to 100 Metric Ton
A hoist is a device for lifting or moving materials. A drum (or wheel) on which a rope (wire or fiber) or chain is wrapped provides the lifting force. Hoists are classified as electro-hydraulic, manual or lever operated, base mounted, or pendant cranes.
Mixing Mill-Voltage:220-415V, Product Type:Mixing Mill
Rubber compounds are made in mixing mills (also known as rolling mills). Here, a rubber base material is combined with a variety of additives such as fillers, softeners, processing aids, and colourants. The rolling mill's two rolls rotate in opposite directions.
Industrial Mixing Mill-Voltage:220V
Mixing mills are the basic part of the rubber industry. Any rubber industry can't survive without this machine. This machine is used to manufacture rubber compounds.
Rubber Mixing Mill-Voltage:220V, Product Type:Rubber Mixing Mill
Rubber Mixing Mill-Voltage:220V, Product Type:Rubber Mixing Mill, Usage:for Mixing and Crude Rubbers Plasticate and Rubber padding's Soak
Separator Machine
The Separating Machine is intended to separate packed goods from their packaging. The separated products can be reworked.
Bucket Elevator-Voltage:220V, Working Temperature:20-225Deg.F
Bucket elevators transport bulk materials vertically. Bucket elevators are similar to conveyor belts, with the main difference being that bucket elevators move material by attaching buckets to a rotating belt or chain.
Hydraulic Power Pack-Voltage:230-440V, Dimension(L*W*H):600MM X 600MM X 600MM
A hydraulic power pack is a self-contained assembly that includes a drive motor, hydraulic pump, and hydraulic fluid tank. The hydraulic pump is driven by the drive motor, which is connected to it via a shaft. The motor and pump can be installed on the tank or inside the oil tank.
Laboratory Mill-Power:220V, Grade:Semi-Automatic
A mill is a device that grinds, crushes, or cuts solid materials into smaller pieces. It is often a structure, machine, or kitchen appliance. In many processes, such comminution is an important unit operation. Mills come in a variety of shapes and sizes, and they process a wide range of materials.
Agglomerate Machine-Power:75 HP, Drive Type:Belt Type, Automatic Grade:Semi-Automatic
Agglomeration machines are used to physically transform loose plastic material into chips that can be fed into an extruder's hopper. The agglomerater is a cylinder with five to nine stationary blades and two rotating blades at the bottom that generate friction and heat.
Lab Hydraulic Press-Dimension(L*W*H):400 X 470 X 560 (MM), Automatic Grade:Semi-Automatic
A hydraulic press, also known as a Bramah press, is a machine that moves a cylinder using synthetic, water, or petroleum-based fluids to generate compressive force1. Hydraulic presses are used in laboratories to prepare samples for analysis.
Lab Hydraulic Press
A hydraulic press is a machine that generates force by using fluid pressure. This force has the ability to compress or shape materials. Hydraulic presses are widely used in manufacturing and industrial applications due to their high force output and ease of operation.
Pelletizing Machine-Power:220V
Pelletizing machines create pellets with consistent size, shape, and weight for handling or metering. Plastics, catalysts, chemicals, and feedstock are among the materials that must be produced in pellet form, necessitating the use of various types of pelletizing equipment.
Skip Conveyor-Load Capacity:1-50Kg, Height:100MM
The speed, width, and angle of the belt all affect conveyor capacity, which can be stated as. Where Q = A v (1). (kg/s, lb./s) Q is the conveyor's capacity (kg/m3, lb./ft3) = density of the material being transported
Extruder Machine-Dimension(L*W*H) 25000*7000*300MM, Voltage:380V
One of the most popular ways to create sheets and strips of standard metal, plastic, and rubber shapes is using an extruder machine. Simply put, an extruder is the device that completes the extrusion process.
Hoper Extruder-Voltage:380V
A motor-driven spring-type metal screw conveyor called an extruder hopper loader is used to move PVC resin and PVC compound from the ground up to the machine's hopper. The conveyor's lower end is equipped with a 200 kg compound receiver with a vibrator.
