The term "styrene-butadiene rubber" (SBR) refers to a family of synthetic rubbers known as styrene-butadiene co-polymer latex (the version developed by Goodyear is called Neolite[1]). These materials have good abrasion resistance and ageing stability when protected by additives. 2012 saw the processing of over 5.4 million tonnes of SBR globally.

The term "styrene-butadiene rubber" (SBR) refers to a family of synthetic rubbers known as styrene-butadiene co-polymer latex (the version developed by Goodyear is called Neolite[1]). These materials have good abrasion resistance and ageing stability when protected by additives. 2012 saw the processing of over 5.4 million tonnes of SBR globally.

The term "styrene-butadiene rubber" (SBR) refers to a family of synthetic rubbers known as styrene-butadiene co-polymer latex (the version developed by Goodyear is called Neolite[1]). These materials have good abrasion resistance and ageing stability when protected by additives. 2012 saw the processing of over 5.4 million tonnes of SBR globally.

It is a two-component cementitious waterproofing coating method based on modified acrylic polymers that, when combined and dried, forms an excellent water-resistant barrier. It offers excellent resistance to both positive and negative stresses.

During the cementitious grouting procedure, a fluid cementitious grout is poured under pressure to fill forms, voids, and fissures. Many other locations, including rock anchors, marine applications, dams, and bridges, can use it. The grouted mass is more durable, stiffer, and less porous.

During the process of cementitious grouting, cementitious grout is injected under pressure to fill forms, voids, and cracks. Many other locations, including rock anchors, marine applications, dams, and bridges, can use it. The grouted mass is more durable, stiffer, and less porous.

By applying a layer of substance to the surface of another material, protective coatings are used to stop or impede corrosion. Either a metallic or non-metallic layer could serve as a shield. In addition to avoiding corrosion, protective coatings can be applied utilising a variety of methods.

By applying a layer of substance to the surface of another material, protective coatings are used to stop or impede corrosion. Either a metallic or non-metallic layer could serve as a shield. In addition to avoiding corrosion, protective coatings can be applied utilising a variety of methods.

Sodium Shield (0 Reviews) As an anti-efflorescence primer, SALT GUARD is a specially coloured coating that prevents salt from accumulating on the wall.

A superior water resistant barrier is produced by the two components of the cementitious waterproof coating system TECHFORCE 2K STRONG after mixing and hardening. FEATURES/ADVANTAGES Great waterproofing membrane binds to porous and non-porous surfaces with excellent substrate adherence. Breathable Non-toxic

After mixing and setting up, the two components of the cementitious waterproof coating system TECHFORCE 2K STRONG form an excellent water-resistant barrier. FEATURES/ADVANTAGES great substrate adherence excellent waterproofing membrane binds to porous and non-porous surfaces. Breathable Non-toxic

TECHSEAL PU2 is a two-component polyurethane sealer that performs exceptionally well. Once it has dried, it forms a strong, flexible connection and seal that can cycle through both expansion and compression.