Steel pipes are cylinder-shaped steel tubes that are utilised in a variety of industry and infrastructure applications. They are the most widely used item produced by the steel sector.........

Bimetallic Sheet is not an alloy and aluminium plates and sheets that have been manually joined rather than electroplated with copper layers are used instead.

Magnetic 'V' blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work. The 'V' block has a total three magnetic surfaces. Top and bottom with 90 'V' angle and end surface opposite to switch.

V-Blocks are precision metalworking jigs typically used to hold round metal rods or pipes for performing drilling or milling operations. They consist of a rectangular steel or cast iron block with a 120 degree channel rotated 45-degrees from the sides, forming a V-shaped channel in the top. A small groove is cut in the bottom of the "V". They often come with screw clamps to hold the work. There are also versions with internal magnets for magnetic work-holding. V-blocks are usually sold in pairs

Magnetic 'V' blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work. The 'V' block has a total three magnetic surfaces. Top and bottom with 90 'V' angle and end surface opposite to switch.

Karbo Carbide Tipped Magnetic V blocks are manufactured using high power magnets and high wear resistant carbide tips. Uniform and strong magnetic pull.

Magnetic 'V' blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work. The 'V' block has a total three magnetic surfaces. Top and bottom with 90 'V' angle and end surface opposite to switch.

The Magnetic Square Type Block is widely used in metalworking. These magnetic blocks have an On/Off switch and are available in many models of your choice. It has strong magnetism and clamping force for accurate measurements.

The Magnetic Square Type Block is widely used in metalworking. These magnetic blocks have an On/Off switch and are available in many models of your choice. It has strong magnetism and clamping force for accurate measurements.

MAGNETIC UNIVERSAL V BLOCK Product Details: Usage For Drilling and Grinding Product Type V Block Material Steel Weight 2.2-2.5 Kilograms (kg)

Magnetic rectangular blocks are designed to hold steel components in position while welding, marking or grinding. They are useful in Tool-Room while doing assemblies of jigs and fixtures. They are used with sine tables for inspection of components.

Roller bearing ‘V’ block is made by alloysteel. Its consists precision ball bearings which are installed on ‘V’ portion. Bearing are replaceable.

‘V’ Blocks are Hardened & Ground to 55HRC ±2HRC The top ‘V’ and bottom ‘V’ are parallel within ±3 micron and it’s squareness to the end faces and height variations to the ‘V’ Block in a pair is within ±3 micron. Supplied with Clamp for holding job.

‘V’ Blocks are Hardened & Ground to 55HRC ±2HRC The top ‘V’ and bottom ‘V’ are parallel within ±3 micron and it’s squareness to the end faces and height variations to the ‘V’ Block in a pair is within ±3 micron. Supplied with Clamp for holding job.

Grade- A: Elongated ‘V’ Blocks made from high quality tool steel. Elongated ‘V’ Blocks are suitable for marking checking, Drilling and milling. V groves & all sides are ground central, parallel & square.

Ice Box-Dimension:605(L) X 390(B) X 330(H)MM, Capacity:50Ltr. Used For: Maintaining uniform temperature for storage & transportation of frozen food, fish, meat, confectionaries, ice cream, fruits & vegetables, chilled beverages, dairy products & pharmaceutical products.

Ice Box-Rectangular:25(L)Used For: Maintaining uniform temperature for storage & transportation of frozen food, fish, meat, confectionaries, ice cream, fruits & vegetables, chilled beverages, dairy products & pharmaceutical products.

Magnetic 'V' blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work. The 'V' block has a total three magnetic surfaces. Top and bottom with 90 'V' angle and end surface opposite to switch

Magnetic Vice Hardened V Blocks with Clamps The V – Blocks have two V – angles of different size to take parts of varying dimensions. By means of the clamp the Work can be held tight in the block.

Magnetic balls is a kind of metal ball with magnetic power. It is composed of many small balls. With the help of the magnetic characteristics of metal balls, these small balls can combine many geometric shapes and designs.