Reachable at 9560662883 
011-46039993 (Ext. 21 to 32) (10am - 06pm)
You have no items in your shopping cart.
Filter BY BRANDS
Pneumatic Tools
Pneumatic Tools
Hand Held Pneumatic Wrench-1/2" (Inch)......
A Handheld Pneumatic Wrench is a type of socket wrench power tool that uses a rotating mass to store energy before abruptly releasing it into the output shaft to produce high torque output with little user effort.......
Industial Torque Wrench-1/2Inch Drive Click Type
Industial Torque Wrench is used to tighten nuts and bolts to a specific torque value. With the use of this tool, fasteners can be properly tightened, preventing harm from being caused by overtightening or joints breaking apart as a result of under tightening.
Grease Pump-Pressure Ratio: 60:1
A grease pump is a lubrication pump designed to apply grease to a single grease point or multiple points in commercial equipment. They’re most often used in manufacturing and automotive applications. More compact pumps hold a few pounds of grease, but larger machines can hold as much as 400 pounds of grease.
Bench Vice (Rear Jaw Sliding)-Jaw Width:4/100 MM, Jaw Openig:115 MM, Depth:45 MM
A vice is a mechanical screw apparatus used for holding or clamping a work piece to allow work to be performed on it with tools such as saws, planes, drills, mills, screwdrivers, sandpaper, etc. Vices usually have one fixed jaw and another, parallel, jaw which is moved towards or away from the fixed jaw by the screw.
Bench Vice (Rear Jaw Sliding)-Jaw Width:5/125 MM, Jaw Openig:150 MM, Depth:65 MM
Many different trades will use a bench vise. Most commonly, you will see them used in carpentry and by mechanics. Any shop will benefit from having a bench vise in place. While it is typically used as a supporting device for mechanical work, bench vises can be used as a fixture to hold woodworking and metalworking tools in place.
Bench Vice (Rear Jaw Sliding)-Jaw Width:6/150 MM, Jaw Openig:200 MM, Depth:75 MM
Many different trades will use a bench vise. Most commonly, you will see them used in carpentry and by mechanics. Any shop will benefit from having a bench vise in place. While it is typically used as a supporting device for mechanical work, bench vises can be used as a fixture to hold woodworking and metalworking tools in place.
Bench Vice (Rear Jaw Sliding)-Jaw Width:8/200 MM, Jaw Openig:270 MM, Depth:80MM
Many different trades will use a bench vise. Most commonly, you will see them used in carpentry and by mechanics. Any shop will benefit from having a bench vise in place. While it is typically used as a supporting device for mechanical work, bench vises can be used as a fixture to hold woodworking and metalworking tools in place.
Drop Forged Bench Vice-Jaw Width:6/150 MM, Jaw Openig:200 MM, Depth:105 MM
Drop forging is a kind of forging process different from press forging, upset forging or other forging processes. In drop forging, the billet is deformed into desired shapes with the help of forging dies. Types of drop forging are open-die drop forging and closed-die drop forging.
Impact Wrench
Impact Wrench Is a type of socket wrench power tool known as an impact wrench, also known as an impactor, impact gun, air wrench, air gun, rattle gun, torque gun, or windy gun, uses a rotating mass to store energy before abruptly releasing it into the output shaft to produce high torque output with minimal user effort.
Ratchet Wrench, Bolt Size: M6(MM), Socket: 10 Double
Ratchet Wrench is a mechanical device that only allows continuous motion, either linearly or rotaryly, in one direction while preventing motion in the opposite direction.
Die Grider
Die grinders are a simple yet powerful tool that is adaptable and may be used to grind almost any material. It is used to polish or smooth rough areas and has amazing power and RPM speeds.
Angle Grinder
Angle Grinder is used to carry out cutting, grinding, deburring, finishing, and polishing. Whether corded or battery-operated, electricity is frequently used to power angle grinders.
Vertical Grinder-Air Iniet:1/2
Vertical Grinder Is a power tool used for grinding is a grinding machine. It is a kind of machining where the cutting tool is an abrasive wheel. Through shear deformation, each abrasive grain on the surface of the wheel removes a tiny chip from the workpiece.
Sander-Paper Size: 150x22.2
Sandpaper is a form of coated abrasive that consists of sheets of paper or cloth with abrasive material attached to one face. There are numerous different types of sandpaper, each having a different paper or backing, grit type, grit size, and bond.
Compact and Accurate Pulse Wrench (Pistol Type)
Compact and Accurater Pulse wrench uses an impact driver to drill steel, wood, or even tougher materials like plastic.
Screwdriver (Short Bit)-Pistol Type
A manual or electric screwdriver called a screwdriver (short bit)-pistol type is used to turn screws. A typical simple screwdriver consists of a handle, a shaft with a tip at the end, and a handle for turning the tip into the screw head.
Grinder (Rodust and High Speed Dia)
Grinder (Rodust and High Speed Dia) Is a rotary tools are portable power tools used for material machining, sanding, honing, and polishing (typically metal, but also plastic or wood).
Grinder (Robust Dia)
Grinding (Robust Dia) machines are devices that have grinding wheels installed and perform grinding operations.
Impact Wrench with 1" Twin Hammer
An impact wrench is a socket wrench power tool designed to deliver high torque output with minimal exertion by the user, by storing energy in a rotating mass, then delivering it suddenly to the output shaft. It was invented by Robert H. Pott of Evansville, Indiana.
Actuator-Model:E12, Make:El-O-Metic
Actuator-Model:E12, Make:El-O-Metic
Pressure : Upto 8 bar
Temperature : -20° to 80°C
Media : Air (dry or lubricated)
