Reachable at 9560662883 
011-46039993 (Ext. 21 to 32) (10am - 06pm)
You have no items in your shopping cart.
Filter BY BRANDS
Power Tools
Power Tools
Portable Blower-800W.......
The fan known as a portable blower can move air under pressure. Air is supplied to several processes using blowers........
Die Grinder-6 MM.........
Die grinders and rotary tools are portable power tools used for material machining, sanding, honing, and polishing ........
Hand Held Circular Saw-1400 W.......
A circular saw is a tool for cutting many materials such as wood, masonry, plastic, or metal and may be hand-held or mounted to a machine. In woodworking the term "circular saw" refers specifically to the hand-held type and the table saw and chop saw are other common forms of circular saws.........
Magnetic Core Drilling Machine-12-38 MM.........
A portable drilling device with a magnetic base is known as a magnetic drilling machine. It can make use of rotary cutters such as milling cutters, annular cutters, twist drill bits, and others.........
Portable Hot Air Gun-2000W.......
A heat gun is a tool that may be held in the hand and emits a stream of hot air that is typically between 100 °C and 550 °C in temperature, with some hotter variants reaching approximately 760 °C.........
Chop Saw-355 MM......
The chop saw is a power tool for motorised woodworking that is used to make square and angled cuts in wood with accuracy and precision. It operates by rapidly rotating a circular steel saw blade........
Angle Grinder (Disc Dia-100M)-850W.......
An angle grinder is a portable power tool used for grinding and polishing. It is sometimes referred to as a side grinder or disc grinder. Although they were first designed as stiff abrasive disc tools, their use with a range of cutters and attachments has been promoted by the availability of an interchangeable power supply.........
Angle Grinder-1400W, 125 MM
An angle grinder is a portable power tool used for grinding and polishing. It is sometimes referred to as a side grinder or disc grinder.
Electrical Grinding Flex Shaft Machine-6MM, 370W, 11500 RPM
Electrical Grinding Flex Shaft Machine are frequently in heavy industries, foundries, and fabrication shops, grinding machines are frequently utilised. It is ideal for big or protracted tasks where lifting them or bringing them close to the grinding machine is not possible.
Magnetic Drill Machine-Dia upto 30MM, Depth upto 40MM
A magnetic drilling machine is a more accurate alternative to hand drilling than a drill press and is faster and more portable.
Straight Pneumatic Sand Rammer-Blows:800/Min, Air Inlet:3/8, Lenght:1156MM
Straight Pneumatic Sand Rammer is used to ram sand uniformly all over the design using the pneumatic rammer. Even small-scale industries can use it. An air compressor is necessary in order to run this rammer. Ramming is performed by a butt that is fastened to the bottom of the piston rod.
Straight Pneumatic Bench Rammer-Blows:850/Min, Air Inlet:1/4, Lenght:457MM
An air compressor-powered tool called a Pneumatic Bench Rammer is used to ram the sand uniformly around the pattern. The piston rod's butt, which is fastened to the base, performs the ramming action. The sand is uniformly shoved by the butt at the relocated locations.
Pistol Grip Pneumatic Riveting Hammer-Blower:1200/Min., Air inlet:1/2 Langth:523MM
A Pistol Grip Pneumatic Riveting Hammer-Blower is a mechanical tool that uses compressed air to drive and install blind rivets through two or more components, binding them together.
Pneumatic Steel Drill-Capacity:25.4MM, Free Speed:450RPM
Pneumatic Steel Drill is used in mining and construction to create small holes in hard rock. The air compressor, which is normally powered by a diesel engine, supplies the air that the pneumatic drill uses for power.
Pneumatic Straight Grinder-RPM:6000, Spindle:M16, Wheel Capacity: 150x25
Pneumatic die grinders are pneumatic devices that turn an abrasive stone for grinding at a high rate of speed in order to grind, cut, or polish.
Pneumatic Jack Hammer-Length:730MM, Stroke: 165MM, Air Inlet:19MM
Pneumatic jackhammers, commonly referred to as pneumatic drills or pneumatic hammers, are jackhammers that get their power from compressed air. Typically, a diesel engine-powered portable air compressor provides the air supply.
Pneumatic Air Pusher Leg-Length : 1825MM, Feed Length:1300MM
Pneumatic Air Pusher Legs enable maximum freedom of movement in any drilling position when used in conjunction with the Rock Drill (Wet) machine for drifting and tunnelling operations.
Pneumatic Pencil Grinder-Length:124MM, RMP:35000
Pneumatic Pencil Grinders are machines with tips for polishing and other similar tasks which uses the appropriate abrasive stones, abrasive mounted wheels and points, moulded abrasives, and carbide burrs, they deburr, deflash, prepare surfaces, clean, and finish.
Pneumatic Die Grinder-Lenght:317MM, RPM:21000, Air Inlet:3/8, Spindle Thread 10
Pneumatic Die Grinder is renowned for producing high rpm. It is capable of grinding precisely, clamping narrow cut-off wheels, and cleaning welds.
Pneumatic Rock Drill Machine-Length:680MM, Stroke:60MM
A Pneumatic Rock Drill Machine is a mobile device powered by compressed air. In the construction business, hydraulic power is also used to power drill equipment. They are typically employed in the construction sector for tasks like drilling through rocks and tearing up pavement.
