Reachable at 9311712978 
011-46039993 (Ext. 21 to 32) (10am - 06pm)
You have no items in your shopping cart.
Filter BY BRANDS
Test Devices and Instruments
Test Devices and Instruments
Clamp Meter (Process Instrument)-Operating Range ( 0-200A, 0-1500 OHM)
A clothespin-shaped tool called a clamp metre can be used to clamp around a live wire and measure the current it is carrying.
Laser Distance Sensor-200MM to 10 Mtr (Sensing Range)
Laser Distance Sensors can collect measurements at a far distance thanks to laser distance sensors. These distance sensors operate on the Time-Of-Flight (ToF) concept, which requires that a laser beam be emitted and then detected as a reflection by the sensor.
Digital Multimeter (Hand Held)-4 Digit Display
Digital multimeter -Multiple electrical stimuli, including voltage, current, and resistance, are measured and verified by a digital multimeter, or DMM. It combines the functions of a voltmeter, ammeter, and ohmmeter and is used often by technicians and electrical engineers for diagnostic purposes.
Panel Meter-415V-220KV, 250VAC/VDC
Panel metres are digital or analogue electrical devices that show a signal input. The ability to transfer data to other devices, such as computers, and alarm choices, among other capabilities, are extra features found on some panel metres.
Incremental Encoder (0-6000RPM, 24VDC)
In order to determine position or motion, an incremental encoder translates the angular motion or position of a shaft into an analogue or digital code. One of the most widely used types of rotary encoders is the incremental encoder.
IGBT Module-Size:LG 106.4 X WD 61.4 X HT 29 MM
The physical construction and packaging of multiple IGBT power semiconductor dies into a single package is known as an IGBT power module.
Line Tester-Length:130, Tip Size:3.5X0.4
An electrical tool called a line tester is used in electrical installations to check for the existence of electricity and to determine the phase or live wire. A tiny light enclosed inside the tester's handle begins to illuminate when its metal tip makes contact with a live circuit.
Line Tester-Length:180, Tip Size:3.5X0.5
A line tester is an electrical tool used to test the presence of current and to identify phase / live wire in electrical installations. When the metal tip of the tester comes in contact with a live circuit, a small light encased inside the handle of the tool starts glowing.
Automatic Line Tester with LCD Display-5W, 230V AC, 50Hz
Automatic Line Tester is an electrical tool used in electrical installations to check for the existence of electricity and to determine the phase or live wire. A tiny light enclosed inside the tester's handle begins to illuminate when its metal tip makes contact with a live circuit.
Insulation Stick for Voltage Detector-17Ft, ID of Tube:28MM, OD of Tube:42MM
Insulation Stick for Voltage Detector is used when replacing wood poles or moving overhead line equipment, such as replacing crossarms, insulators, or other hardware in medium- and high-voltage substations. When working on either live or dead power systems, approved tools and personal protective equipment, such as insulating gloves and arc flash helmets, are typically used.
Telephone Analyzer with Caller ID Tester-16 Digit Display
A new type of digital metre called a "Telephone Dialing/Caller ID Analyzer" was created specifically to analyse Caller ID and the characteristics of telephone dials (Pulse/Tone).
Voltage Indicator-Voltage: 0-500 V, 110V
A voltage indicator is a tool used to identify whether an object has an electrical charge or not. An complex equipment that detects accurate voltage levels in electrical systems can be used, or it can be a straightforward pen-shaped piece of testing hardware.
Digital Multimeter-10A LCD Display with 3 and 1/2 Digit
A digital multi meter, or DMM, measures and verifies multiple electrical stimuli, including voltage, current and resistance. It's a daily diagnostic tool used by technicians and electrical engineers and combines the features of a voltmeter, ammeter and ohmmeter.
Digital Multimeter-10A LCD Display with 3 and 1/2 Digit
A digital multi meter, or DMM, measures and verifies multiple electrical stimuli, including voltage, current and resistance. It's a daily diagnostic tool used by technicians and electrical engineers and combines the features of a voltmeter, ammeter and ohmmeter.
Digital Multimeter-10A LCD Display with 3 and 1/2 Digit
A Digital Multimeter monitors and verifies voltage, current, and resistance. It combines the functions of a voltmeter, an ammeter, and an ohmmeter and is a common diagnostic equipment used by technicians and electrical engineers.
Digital Multimeter-10A LCD Display with 3 and 1/2 Digit
A digital multi meter, or DMM, measures and verifies multiple electrical stimuli, including voltage, current and resistance. It's a daily diagnostic tool used by technicians and electrical engineers and combines the features of a voltmeter, ammeter and ohmmeter.
Digital Multimeter-10A LCD Display with 3 and 1/2 Digit
Digital Multimeter monitors or verifies voltage, current, and resistance. It's a daily diagnostic tool used by technicians and electrical engineers and combines the features of a voltmeter, ammeter and ohmmeter.
Digital Multimeter-10A LCD Display with 3 and 1/2 Digit
A digital multi meter, or DMM, measures and verifies multiple electrical stimuli, including voltage, current and resistance. It's a daily diagnostic tool used by technicians and electrical engineers and combines the features of a voltmeter, ammeter and ohmmeter.
Digital Multimeter-10A LCD Display with 3 and 3/4 Digit
A digital multimeter, or DMM, measures and verifies multiple electrical stimuli, including voltage, current and resistance. It's a daily diagnostic tool used by technicians and electrical engineers and combines the features of a voltmeter, ammeter and ohmmeter.
Digital Multimeter-10A LCD Display with 3 and 1/2 Digit
Digital Multimeter monitors and verifies voltage, current, and resistance. It combines the functions of a voltmeter, an ammeter, and an ohmmeter and is a common diagnostic equipment used by technicians and electrical engineers.
