x

Suggestion/Complaint


Valve

Valve

View as
per page
Picture of Check Valve-1X1/4" (Inch)........

Check Valve-1X1/4" (Inch)........

Check valves, non-return valves, reflux valves, retention valves, foot valves, and one-way valves are all types of valves that typically let only one direction of fluid flow through them. Check valves are two-port valves, which means that each of their body apertures has a separate fluid inlet and outlet..........
Call for pricing
Picture of Gate Valve-10 Inch

Gate Valve-10 Inch

A gate valve, often referred to as a sluice valve, opens by raising a barrier (gate) out of the flow of fluid's passage. When the gate is fully opened, gate valves barely hinder the flow of fluid and take up very little space along the pipe axis.
₹ 63,124.00 ₹ 69,436.40
Picture of Gate Valve-200MM

Gate Valve-200MM

A gate valve, often referred to as a sluice valve, opens by raising a barrier (gate) out of the flow of fluid's passage. When the gate is fully opened, gate valves barely hinder the flow of fluid and take up very little space along the pipe axis.
₹ 20,114.00 ₹ 22,125.40
Picture of Ball Valve-150MM

Ball Valve-150MM

A ball valve is a flow control device that regulates the flow of liquid through it using a hollow, perforated, and pivoting ball. When the ball's hole is parallel to the flow inlet, the valve is open. When the ball is turned 90 degrees by the valve handle, the valve is closed, obstructing the flow.
₹ 11,246.00 ₹ 12,370.60
Picture of Gate Valve-125MM

Gate Valve-125MM

A gate valve, often referred to as a sluice valve, opens by raising a barrier (gate) out of the flow of fluid's passage. When the gate is fully opened, gate valves barely hinder the flow of fluid and take up very little space along the pipe axis.
₹ 9,342.00 ₹ 10,276.20
Picture of Butterfly Valve (Flanged)-100MM

Butterfly Valve (Flanged)-100MM

A butterfly valve is a type of valve used to control or isolate fluid flow. An rotating disc acts as the closing mechanism. Pipelines use butterfly valves, a class of rotational motion valves with a quarter-turn, to stop the flow of fluid. Butterfly valves are frequently mentioned as having the ability to control flow.
₹ 28,582.00 ₹ 31,440.20
Picture of Butterfly Valve (Wafer)-150MM

Butterfly Valve (Wafer)-150MM

A butterfly valve is a type of valve used to control or isolate fluid flow. An rotating disc acts as the closing mechanism. Pipelines use butterfly valves, a class of rotational motion valves with a quarter-turn, to stop the flow of fluid. Butterfly valves are frequently mentioned as having the ability to control flow.
₹ 9,161.00 ₹ 10,077.10
Picture of Butterfly Valve (Flanged)-50MM

Butterfly Valve (Flanged)-50MM

A butterfly valve is a type of valve used to control or isolate fluid flow. An rotating disc acts as the closing mechanism. Pipelines use butterfly valves, a class of rotational motion valves with a quarter-turn, to stop the flow of fluid. Butterfly valves are frequently mentioned as having the ability to control flow.
₹ 17,482.00 ₹ 19,230.20
Picture of Butterfly Valve (Flanged)-200NB

Butterfly Valve (Flanged)-200NB

A butterfly valve is a type of valve used to control or isolate fluid flow. An rotating disc acts as the closing mechanism. Pipelines use butterfly valves, a class of rotational motion valves with a quarter-turn, to stop the flow of fluid. Butterfly valves are frequently mentioned as having the ability to control flow.
₹ 57,273.00 ₹ 63,000.30
Picture of Blow off Valve-Make Gradient, Part No. 1622369480

Blow off Valve-Make Gradient, Part No. 1622369480

A blowoff valve is a pressure release system present in most petrol turbocharged engines. Blowoff valves are used to reduce pressure in the intake system as the throttle is closed, thus preventing compressor surge.
Call for pricing
Picture of Unloader Valve (GA Series)-Part No. 1622171382

Unloader Valve (GA Series)-Part No. 1622171382

A pressure washer unloader valve diverts the water flow through the bypass when the trigger on the gun is depressed. The Unloader valve is designed to respond to an increase in pressure or a change in water flow. The unloader valve can also be used for adjusting the pressure of your machine.
Call for pricing
Picture of 3/2 Single Solenoid Valve-Size:1/8'', Working Pressure:10kgf/cm, Working Medium:40Micron

3/2 Single Solenoid Valve-Size:1/8'', Working Pressure:10kgf/cm, Working Medium:40Micron

If your valve is a single solenoid type, it means when voltage is applied to the single “A” solenoid coil, the main spool inside the valve will shift which will cause the valve ports to output air on one side causing the pneumatic actuator to extend to a new position.
Call for pricing
Picture of 3/2 Single Solenoid Valve-Size:1/8'', Working Pressure:10kgf/cm, Working Medium:40Micron

3/2 Single Solenoid Valve-Size:1/8'', Working Pressure:10kgf/cm, Working Medium:40Micron

If your valve is a single solenoid type, it means when voltage is applied to the single “A” solenoid coil, the main spool inside the valve will shift which will cause the valve ports to output air on one side causing the pneumatic actuator to extend to a new position.
Call for pricing
Picture of 3/2 Single Solenoid Valve-Size:1/4'', Working Pressure:10kgf/cm, Working Medium:40Micron

3/2 Single Solenoid Valve-Size:1/4'', Working Pressure:10kgf/cm, Working Medium:40Micron

If your valve is a single solenoid type, it means when voltage is applied to the single “A” solenoid coil, the main spool inside the valve will shift which will cause the valve ports to output air on one side causing the pneumatic actuator to extend to a new position.
Call for pricing
Picture of 3/2 Single Solenoid Valve-Size:3/8'', Working Pressure:10kgf/cm, Working Medium:40Micron

3/2 Single Solenoid Valve-Size:3/8'', Working Pressure:10kgf/cm, Working Medium:40Micron

3/2-way valve have three connection ports and two positions that can be driven via a solenoid valve. They are used to control a single-action cylinder, for driving pneumatic actuators, used as a blow-off valve, as pressure release valve and in vacuum applications.
Call for pricing
Picture of 3/2 Single Solenoid Valve-Size:1/2'', Working Pressure:10kgf/cm, Working Medium:40Micron

3/2 Single Solenoid Valve-Size:1/2'', Working Pressure:10kgf/cm, Working Medium:40Micron

3/2-way valve have three connection ports and two positions that can be driven via a solenoid valve. They are used to control a single-action cylinder, for driving pneumatic actuators, used as a blow-off valve, as pressure release valve and in vacuum applications.
Call for pricing
Picture of 5/2 Single Solenoid Valve (M5)-Working Pressure:10kgf/cm, Working Medium:40Micron

5/2 Single Solenoid Valve (M5)-Working Pressure:10kgf/cm, Working Medium:40Micron

5/2 solenoid valves and 5/3 solenoid valves are most often used as directional control valves for double-acting pneumatic actuators. The single-coil type of 5/2 valve usually has a spring or pilot air return so that when de-energised, the valve returns to it's starting function.
Call for pricing
Picture of 5/2 Single Solenoid Valve-Size-1/8'', Working Pressure:10kgf/cm, Working Medium:40Micron

5/2 Single Solenoid Valve-Size-1/8'', Working Pressure:10kgf/cm, Working Medium:40Micron

5/2 solenoid valves and 5/3 solenoid valves are most often used as directional control valves for double-acting pneumatic actuators. The single-coil type of 5/2 valve usually has a spring or pilot air return so that when de-energised, the valve returns to it's starting function.
Call for pricing
Picture of 5/2 Single Solenoid Valve-Size-1/8'', Working Pressure:10kgf/cm, Working Medium:40Micron

5/2 Single Solenoid Valve-Size-1/8'', Working Pressure:10kgf/cm, Working Medium:40Micron

5/2 solenoid valves and 5/3 solenoid valves are most often used as directional control valves for double-acting pneumatic actuators. The single-coil type of 5/2 valve usually has a spring or pilot air return so that when de-energised, the valve returns to it's starting function.
Call for pricing
Picture of 5/2 Single Solenoid Valve-Size-1/4'', Working Pressure:10kgf/cm, Working Medium:40Micron

5/2 Single Solenoid Valve-Size-1/4'', Working Pressure:10kgf/cm, Working Medium:40Micron

5/2 solenoid valves and 5/3 solenoid valves are most often used as directional control valves for double-acting pneumatic actuators. The single-coil type of 5/2 valve usually has a spring or pilot air return so that when de-energised, the valve returns to it's starting function.
Call for pricing